HDPE Drum 3 Layer Extrusion Blow Molding Three Layers Jerry Can
Manufacturing 20liter View Strip Making Machine
Introduction
1. The screw adopts high potency melt to make sure the material
well mixed.
2. Adopt frequency control of motor system to reduce the power
consumption.
3. Adopt horizontal movement frame to improve stability and speed.
4. The oil cylinder is in the center of the moldboard, uniform
stress for quality products and increase life span.
5. High stench guild rod controller the mold open and clamp, to
enhance the steadily and high efficiency.
6. The extrusion head use spreader or screw type to well mixed the
thickness and easy to change different color.
7.Advanced design to eliminate the melt material degrade in the
runner, to avoid the perform draw-down and the welding line.
8. The precise time control system assured good quality, suitable
weight and reduces production cycle.
9. Freely to move the extrusion foundation backward or forward to
make the exchange of the mold easy.
10. Multi-function bottom blowing type for shaped products.
11. The mechanical arm can take out the product automatically.
It is automatic blow molding machine which can make 20-60L jerry
can,barrels,tool box, model, car hollow products and so on.
1. Hydraulic automatic
2. 80mm or 90mm screw.
3. Material can be PP,PE,HDPE,HMWHDPE,ABS.
4. Adopt all linear guide.
5. Adopt servo drive motor to save energy.
Parameter
Machine Model | BST-20 |
Max Product Volume | 20L |
Target Material | HDPE/PP |
Machine Size | 5.0x2.5x2.95 m |
Machine Weight | 9.2 Tons |
Voltage Suitable | Customer Specified |
Screw Diameter | 50 mm | 75 mm | 50 mm |
L/D Ratio | 24:1 | 24:1 | 24:1 |
Barrel Heating Power | 10.8 KW | 20.2 KW | 10.8 KW |
Extrusion Motor Power | 11 KW | 30 KW | 11 KW |
Plasticizing Capacity | 50 KG | 100 KG | 50 KG |
Platen Size | 600x650 mm |
Opening Stroke | 400~850 mm |
Max Mould Size | 650x600 mm |
Head No. | 1 |
Central Distance | - |
Heating Zone No. | 2+1 |
Head Heating Power | 11 KW |
Total Power | 95 KW |
Average Energy Consumption | 49.5 KW |
Compressed Air Needed | 0.8 Mpa / 1.0 m3 |
Cooling Water Needed | 6.5 m3/H |
Loading Reference | 40’GP |
