Description:

Automatic cap lining machine can punch the liner to some mode and then finish capping to avoid the manual pollution and improve the product efficiency as well. It is mainly applied to packaging, medicine, food and so on industries.

The machine isused to producecap liner, which was produced by TPE plastic pellet.

After high temperature plasticizing molded into cap, make inside cushion with cap together.

The development of this machine could greatly increased the production efficiency,
and effectively solves the inner pad health and leakage problems.

The advancement of this machine is small-size, high-produce efficiency and easy-operated.

The cap liner made by this machine can be even more smooth and beautiful, it also will be accord with national food
hygiene standards for the good leak proof performance and strong pressure resistance.

Features:

PLC controller, panel operation, stable running and easy operation, 24-hour running available

Automatic checking to remove inverted cap

Rotary positioning for accurate capping

Punching device to achieve different capping by changing mould size or specification

Calculation function, liner shortage and tie-in checking function

Technique Parameter(standardized):

VDD: 220VAC±10%, single-phase, 50/60Hz, total power: 1KW

MPa: 0.6-0.8MPa, cfm: 300L/min at most;

Narrow Volume thickness (mm): 0.2-1.0, plate volume in (mm): 76, out (mm): 500 at most

Punching Speed (unit/min): 0-90 (liner with 22mm diameter, 0.3mm thickness and 26mm diameter cap as the testing medium, others according to actual usage)

Application for cap diameter (mm): 18-110, height (mm): 10-25. Customized machine is for your special size and form capping.

Optional Configuration:

1. Dispense device

2. Inhaler(filtration sterilization core included) adding

3. Liner unfold grip device

4. Upper vibratory feed unit or climbing deliverer

Parameter