1L Plastic Bottle HDPE Blow Molding Machine 1 Liter Plastic Jerry
Can Extrusion Blow Moulding Machine
Introduction
Based on different functions, U-TECH Blow Molding machine can be
divided into Single Station, Double Station, Four Station series;
Multiple Layer series; Accumulator, Parison Control System series.
Besides, the applicable scopes range from 5ml to 3000L, and they
are suitable for various kinds of plastic products, such as oil
series barrels, sprayer barrels, comestics bottles, pharmaceutical
bottles, medicine bottles, detergent bottles, pesticide bottles,
food containers, plastic toys, Christmas balls, plastic
experimental apparatus, auto-parts, road barriers, water tanks and
plastic furniture etc.
Features
1. Low malfunction rate in first 5 years. Life span is over 15
years.
2. With safety light curtain. Guarantee the safety of workers
without influencing the auto-running of machine.
3. Equip stainless-steel-blowing tube. To avoid blowing tube can
not cooling down which result from the rusting block up the water
pipe.
4. Equip thicker linear rolling guide with 65 mm guide rod for the
mould station moving. The machine has longer life span than those
with 45-50mm guide rod which was used by other factories.
5. Auto-lubrication control system is a creative design which can
renew the lubrication oil. Pump out certain volume of lubrication
oil to each point. Collecting the used oil for cleaning and
environmental friendly, while lengthen the life span of machine.
6. Equip hydraulic oil accurately secondary filter systemwith
detector and indicator. Ensure the hydraulic oil is clean and
guarantee the long life span of hydraulic system.
7. Equip hydraulic oil accurately secondary filter systemwith
detector and indicator. Ensure the hydraulic oil is clean and
guarantee the long life span of hydraulic system.
8.Equip servo valve and high-precision electronic caliper for mould
station moving, PQ closed-loop control. To make the action of mould
station moving more stable and energy efficient.
9. The construction of blowing tube carrier and mould station are
more stable, which is able to resist the force from the blowing
tube without hook.
10. Equip accumulation air compressor, water-oil-dust separating
system to make the pneumatic system more stable and long life.
11. Equip large hard-tooth faced redactor for extruding, which
ensure energy efficient and long life.
12. Thick, high quality chroming guide rod can ensure energy
efficient and long life.
13. Fittings from digitalize producing ensure we can change it as
long as it is the same one.
Parameter
| Machine Model | BST-1 |
| Max Product Volume | 5 L |
| Target Material | LDPE/HDPE/PP/PVC/PETG |
| Machine Size | 3.8x2.2x2.4 m |
| Machine Weight | 5.5 Tons |
| Voltage Suitable | Customer Specified |
| Screw Diameter | 70 mm |
| L/D Ratio | 24:1 |
| Barrel Heating Power | 14.2 KW |
| Extrusion Motor Power | 22 KW |
| Plasticizing Capacity | 90 KG |
| Platen Size | 320x390 mm |
| Opening Stroke | 150~500 mm |
| Max Mould Size | 350x390 mm |
| Head No. | 1 |
| Central Distance | 160 mm |
| Heating Zone No. | 2+1 |
| Head Heating Power | 5.7 KW |
| Total Power | 52 KW |
| Average Energy Consumption | 31.5 KW |
| Compressed Air Needed | 0.6 Mpa / 1.0 m3 |
| Cooling Water Needed | 4.5 m3/H |
| Loading Reference | 20’GP |
